RMD 80

Trading Desk: tel: +357 25350032,  email: This email address is being protected from spambots. You need JavaScript enabled to view it., Yahoo: energynet, Skype:energy.net1

RMD 80 - Replaces the grade RMD 80 created by ISO 8217:2005 most resembles 60 / 80 cst. Produced with a low pour point for smaller vessels without tank heating. Higher pour point though than RMB 30.

Units
Limits
Test Method ISO
Density at
15°C kg/m3
max
975.0
3675 / 12185
Approx. Kinematic Viscosity at
50°C cSt
30.0
3104
Kinematic Viscosity at
40°C cSt
min
-
3104
Kinematic Viscosity at
40°C cSt
max
-
3104
CCAI
max.
860
*
Flash Point
°C
min
60
2719
Pour Point (upper), Winter Quality
°C
max
0
3016
Pour Point (upper), Summer Quality
°C
max
30
3016
Micro Carbon Residue
%(m/m)
max
14.0
10370
Ash
%(m/m)
max
0.070
6245
Total Sediment Accelerated
%(m/m)
max
0.10
10307-2 (B)
Water
%(V/V)
max
0.50
3733
Sulphur
%(m/m)
max
*
8754
Hydrogen Sulfide
%(m/m)
max
2.0
IP470
Vanadium
mg/kg
max
150
IP501/ IP407 / 14597
Sodium
mg/kg
max
100
10478
Aluminium plus Silicon
mg/kg
max
40
10478
Acid Number
mg KOH/g
max
2.5
ASTM D664
Used lubricant oil (ULO's)
Zinc
mg/kg
max
15
IP 501 or 470
Phosporus
mg/kg
max
15
IP 501 or 470
Calcium
mg/kg
max
30
IP 501 or 470

*Statutory - in an ECA this must be max 1%S and 3.5%S for all other areas. However, some areas may not have 3.5% available. The Global Cap brought into force on 1st January 2012 has no grace period under Marpol Annex VI. Also, there is no policy for residual fuel aboard with sulpur content more than 3.5%. If fuel is higher than 3.5%in sulphur content than this is not compliant with Marpol Annex VI.

 *Formula for CCAI:

 CCAI=D-140.7 \log (\log (V+0.85))-80.6-210 \ln \left (\frac{t+273}{323} \right )

 which is equivalent to:

CCAI=D-140.7 \log (\log (V+0.85))-80.6-483.5 \log \left (\frac{t+273}{323} \right )

Where:

D= density at 15°C (kg/m3)
V= viscosity (cST)
t = viscosity temperature (°C)

 

ISO 8217:2010

Technical Issues

Specs

Useful Links

Contact Us

Trading Desk

tel: +357 25350032
email: This email address is being protected from spambots. You need JavaScript enabled to view it.



ibia