RMG 380

Trading Desk: tel: +357 25350032,  email: This email address is being protected from spambots. You need JavaScript enabled to view it., Yahoo: energynet, Skype:energy.net1

RMG 380 - replaced RMG 35 cst from ISO 8217:1996. The ULO's are listed for the first time under ISO specs but as guides only and are not mandatory.

Units
Limits
Test Method ISO
Density at
15°C kg/m3
max
991.0
3675
Approx. Kinematic Viscosity at
50°C cSt
380.0
3104
Kinematic Viscosity at
40°C cSt
min
-
3104
Kinematic Viscosity at
40°C cSt
max
-
3104
Flash Point
°C
min
60
2719
Pour Point (upper), Winter Quality
°C
max
0
3016
Pour Point (upper), Summer Quality
°C
max
30
3016
Cloud Point
°C
max
-
3015
Cetane Number
max
-
5165
Micro Carbon Residue on 10% Residue
%(m/m)
max
-
10370
Micro Carbon Residue
%(m/m)
max
18
10370
Ash
%(m/m)
max
0.15
6245
Sediment by Extraction
%(m/m)
max
-
3735
Total Sediment Potential
%(m/m)
max
0.10
10307-2
Water
%(V/V)
max
0.50
3733
Sulphur
%(m/m)
max
3.50*
8754
Vanadium
mg /kg
max
300
14597
Aluminium plus Silicon
mg/kg
max
80
10478
Total Acid Number
mg KOH/g
max
3
6618
Used lubricant oil (ULO's)
Zinc
mg/kg
max
15
IP 501 or 470
Phosporus
mg/kg
max
15
IP 501 or 470
Calcium
mg/kg
max
30
IP 501 or 470

*Statutory - in an ECA this must be max 1%S and 3.5%S for all other areas. However, some areas may not have 3.5% available. The Global Cap brought into force on 1st January 2012 has no grace period under Marpol Annex VI. Also, there is no policy for residual fuel aboard with sulpur content more than 3.5%. If fuel is higher than 3.5%in sulphur content than this is not compliant with Marpol Annex VI.

ISO 8217:2005

Technical Issues

Specs

Useful Links

Contact Us

Trading Desk

tel: +357 25350032
email: This email address is being protected from spambots. You need JavaScript enabled to view it.



ibia